Parts Counter - Parts and Hardware

Convert Your Sportster
Sportster owners, check this out. Paughco has a complete line of 100-percent made-in-the-USA components that will allow you to quickly and painlessly convert your Sporty into a full-on street-worthy custom chopper. Shown here are just a few of the thousands of products currently available. Included is the "Stretched Coffin," which holds an amazing 4.25 gallons. It measures 25 x 13 x 10 inches. If you've been looking for a one-stop source for Sportster chopper parts, Paughco has you covered. Retail for the "Stretched Coffin" is $595. For more information, contact Paughco at (775) 246-5738, or visit www.paughco.com.

Rise Above the Rest
Check out these crazy risers from Nash Motorcycle Company. The Slugger Risers, built in the USA, are machined-aluminum risers available in 2-inch, 4-inch, 6-inch, and 8-inch rises. They are designed for tall ape-hangers. The risers clamp down with extra gripping surface. No more movement in your 18-inch apes, or "gimp hangers." Retail starts at $175. For more information, contact Nash Motorcycle Company at (360) 693-4225, or visit www.nashmotorcycle.com

Drop a Deuce
Custom Works Inc. introduces its stylish custom front fenders for Harley-Davidson Deuce models. Constructed from multi-layered, hand-laid composites, the fenders are available and ready for paint with a smooth, sleek surface. Retail starts at $149.95.For more information, contact Custom Works Inc. at (386) 257-1300, or visit www.customworksdaytona.com.

Hot New Helmet
The folks at Scorpion Sports Inc. have introduced a new open-faced helmet. The EXO-200 is an all-new design with easily interchangeable faceshield and sun visor that features an advanced composite-engineered shell: quiet, aero-tuned design for wind tunnel-tested comfort. Retail starts at $119.95.

Oil Cooled
Custom Cycle Engineering has a new product that acts as an oil cooler without the ugly appearance of a bulky oil-cooler radiator. The deep finned pattern machined into the outside of the rocker box and the scalloped pattern on the inside create extra surface area and help reduce the oil temperature 8 to 12 degrees. Made from 6061-T6 billet aluminum, the unit offers plenty of room for high-lift cams, and is available in either polished finish or chrome plating. Not only do you get the oil-cooling properties, you also get the most dynamic-looking rocker-box covers on the market. Retail starts at $579. For more information, contact Custom Cycle Engineering at (800) 472-9253, or visit www.customcycleengineering.com.

Zip Up and Ship Out
Got your eye on that new JIMS/Screamin' Eagle 120-inch engine, but your bike is EFI and the motor is only available for carb-equipped bikes? Here's a quick and easy way to have it all. Zipper's has developed a ThunderMax EFI system just for the 120, complete with a fully mapped ECM. The company's ThunderJet 54mm throttle body, high-flow manifold, and air-cleaner system ensure enough airflow for this engine to reach its full potential easily, and the high resolution, Alpha-N ThunderMax ECM takes the hassle out of tuning-the engineers have already mapped it for you. Retail starts at $1,295. For more information, contact Zipper's Performance Products at (410) 579-2828, or visit www.zippersperformance.com.

Jack of All Trades
Pro-One Manufacturing offers builders an extensive selection of custom billet forks and related accessories, from complete frontend assemblies and stylish billet lower legs to custom extended fork tube packages. Looking for a unique set of fork trees? Pro-One manufactures one of the widest selections on the market. The company's billet triple-trees come with and without lights and in various finish combinations. Retail starts at $475.95. For more information, contact Pro-One Manufacturing at (800) 884-4173, or visit www.pro-one.com.

New From Snap-On
Snap-On Tools continues its reputation for providing comfortable and durable tools with the announcement of the new 18-volt cordless drill (CDR4850), a strong and versatile addition to any technician's collection. Designed to drill holes and drive fasteners for a variety of jobs, the drill offers technicians maximum power and ease-of-use. Retail starts at $369.95. For more information, contact Snap-On at (877) 762-7662, or visit www.snapon.com.