The Shining
|
12 Valentine's next step was to cut the wires to the stock signals, slide a piece of black shrink tubing onto the remaining old wires, then solder the wiring for the new ones in place. Since we're going from normal turn signals to run/turn models, the wiring is slightly different. The orange wire is the running signal -- it keeps the light on when the bike is running to increase visibility -- while the red is for higher intensity in turn mode. The run wire connected to the wiring harness, while the red turning wire went to the wires for the old turn signals -- brown for the right turn signal, purple for left. View Related Article
|
|
|
|