 After measuring twice and...  After measuring twice and cutting the air-lines on a flat surface at 90 degrees, he pushed the lines firmly into the fitting until he felt a slight click. |  The Y fitting was installed...  The Y fitting was installed next, then an air-line was run down through the frame to the compressor. |  The seat pan was bolted to...  The seat pan was bolted to the seat nose tongue. |
 He marked the seat pan mounting...  He marked the seat pan mounting adapter plate, then mounted the plate to the seat. |  The adapter plate was bolted...  The adapter plate was bolted to the air springs with the supplied hardware. |  The finished installation...  The finished installation. |
 In the raised position, there...  In the raised position, there is plenty of travel for the air springs to absorb the bumps. |  When completely lowered, the...  When completely lowered, the bike maintains the look of a regular seat on a rigid. In fact, it is hard to spot a bike with one of these systems, but there's a huge difference once you've ridden one! | |