Sucker Punch Sally's Fender Strut - Installation Guide
|
Next, we set the fender centered on the tire. We used a simple T-bracket that we fabricated out of some flat steel stock as the front support bracket. Then we mounted the T-bracket to the fender first by drilling holes and mounting it centered. We checked and made sure the fender was centered again and tack welded the front bracket to the frame cross member behind the battery. When we did the final welding, we watched for excessive heat that could cause the fender to mount crooked. Some of it can be corrected with the struts, but not all of it. View Related Article
|
|
|
|