Going Solo
The Sprung Solo Seat Pan from Young Choppers is ready to be covered in the skins of your choice. The two studs on the rear of the seat are used for mounting either traditional or air springs. The seat rocks on a fulcrum that's bung-mounted just below the nose, and it's already drilled around the perimeter for easy lacing. For the ladies, there is an accompanying pillion seat.
Young Choppers (770) 425-1305
www.youngchoppers.com Breathing Room
Make your Evolution Big Twin-style engine breathe better and with considerably less oil carryover with the new S&S Reed Valve. Designed as an upgraded replacement for rotary breather gears, the reed valve lets your engine breathe based on crankcase pressure, not timing. The S&S Reed Valve slides right into place with no timing-mark alignment or rotating parts.
S&S Cycle (608) 627-1497
www.sscycle.com Decompressing
Most mini air compressors create more noise than airflow, but here's an exception: the new Michelin high-volume portable 12V DC compressor from Alltrade Tools. It pumps out 120 psi working pressure without breaking a sweat, easily inflating a 195/75R14 tire from 0 to 30 psi in two minutes! It comes with a selection of adapters and needles for inflating rafts, air mattresses, and sporting goods as well, in addition to being equipped for off-road use.
Alltrade Tools (800) 368-6653
www.powerbuilttools.com Back to School
If you're riding a bike with a foot-operated clutch and jockey-shift transmission, Baker has a trick to keep you looking "old skool": the N1 shift drum. Originally developed for drag racers, the N1 shift pattern was designed to prevent false Neutrals between First and Second by positioning Neutral under First. This drag-racer trick also eliminates all room for error in finding Neutral on a jockey-shift bike. Professionals at Choppers Inc., Detroit Bros., and Indian Larry Legacy use this unspoken trick, and they love it.
Baker Drivetrain (877) 640-2004
www.bakerdrivertrain.com It's All Yours, Baby
Want to turn your Sporty into a street-worthy custom chopper? You're in luck! Paughco has a complete line of components that will allow you to quickly and painlessly convert your bike into a work of street art. Among the parts available are the Stretched Wide Tire Rigid Frame, Stretched Coffin, and many others.
Paughco (775) 246-5738
www.paughco.com Next Generation
Compu-fire's popular Gen 3 Starter Motor will now operate with the Baker Drop Starter Slam Clutch right-side transmission system. The starter features a highly efficient motor design that produces 2kw of cranking power while only drawing one-half the amps out of the battery compared to other available units. The starter has a lower reduction gear ratio of 6:1 for more torque and a six-pole permanent-magnet field design to eliminate starter stall-out.
Engine Electronics Inc.
(909) 598-5485
www.compufire.com Properly Turned Out
Bassani's latest Pro-Turnouts are custom-fabricated to fit the popular machines crafted by Bourget. Aggressive style is combined with the superior performance characteristics on which Bassini has built its reputation. The Pro-Turnouts are stacked "over and under" and feature dyno-tuned, stepped head pipes; an integrated baffle system; and an unmistakable exhaust note.
Bassini (866) 439-4287
www.bassanipipes.com It's All You
The latest Derby and Inspection Covers from Pro-One allow you to design your own personalized covers based on a variety of interchangeable base caps and custom inserts. Machined from 6061 T-6 billet aluminum and with either show chrome plating or black-anodized, the unique covers can be ordered engraved with the Pro-One design of your choice or with a smooth finish. With a number of different inserts, the possible combinations are staggering.
Pro-One (800) 844-4173
www.pro-one.com When the Heat Is On
New clutch plates and kits from Drag Specialties are 100-percent asbestos-free and are designed to perform under extreme heat conditions while allowing for smooth, precise shifting. Clutch kits are available with Kevlar or organic friction plates; Kevlar plates have a higher-density compound for increased durability, while organic plates are perfect for OEM replacement.
Drag Specialties
www.dragspecialties.com Sterling Ignition
The Sterling Chrome II Ignition Wires use patented technology to create an exclusive braid that looks like chrome. It perfectly matches the color and weave of all other Magnum Sterling Chromite II cables and lines, and high-voltage silicone ignition wire is used for all applications. An OE-style "Screamin' Eagle" high-performance suppression conductor core is also used for guaranteed compatibility with all H-D ignition systems and modules.
Magnum Shielding (585) 381-8380
www.magnumshielding.com Rider Not Included
This hot new right-side-drive rolling chassis from Tedd Cycle comes with everything you see in this photo, including a 300 rear tire! The kit includes an assembled six-speed transmission, over billet fork kit, billet headlight, and outrageous prism gas tank. The frame accommodates EV or TC-88 motors and features full rigid styling with dual-tube motor carriage, 1-3/8-inch tubing, and a
1-1/2-inch backbone.
Tedd Cycle (800) VEE-TWIN
www.vtwinmfg.com Better Than Cleaning Your Room
Hate digging into the nooks and crannies of your bike? The new S100 detailing set makes it quick and simple to get your bike looking its best. The set contains 25 detailing swabs that can bend up to 90 degrees to reach into the most difficult places. It's available at Harley-Davidson dealers and other bike shops nationwide.
S100 (203) 488-6569
www.s100.com Feeling Lucky?
Leroy-Thompson's Rollin' 7s Dice Risers will make sure your luck changes. The risers are machined from T-6 aircraft aluminum, and are drilled and tapped for 1/2-1/3-inch standard bolts. Rollin' 7s are made to fit 1-inch handlebars and are available in 2-inch, 4-inch, and 6-inch rise. They're available polished, black-anodized, or chromed. These babies are even numbered correctly to match gaming dice, leaving the odds in your favor.
Leroy-Thompson Choppers (440) 266-1635
www.leroythompsonchoppers.com The Stimulus Frame
The "Stimulus" is a raw, organic animal with strong feminine lines that will lead the most timid fabricator down a lustful road of inspiration! Original no-front-downtube, oil-in-frame, eccentric adjusters, single-side swingarm, and a U.S. Patent (No. 11/342488) mean you will have a true one-off.
Speed & Precision Cycles
(603) 627-3930
www.scottplourde.com When Precision Counts
The new Precision TIG 225 from the Lincoln Electric Company is the most technologically advanced and widest-amperage square-wave TIG-welding power source in its class. It features both AC and DC output, increased welding output, and new auxiliary power. With the widest welding amperage in its class-5 to 230 amps-you can't go wrong.
Lincoln Electric Company
(216) 481-8100
www.lincolnelectric.com Nitrous Simplified
Zipper's Performance Products introduces the N.A.D.S. Dry Nitrous System for EFI Twin Cam bikes. This revolutionary design simplifies the installation of nitrous oxide on a motorcycle and is a completely "dry" system that requires no secondary fuel source. The kit has everything needed for a quick, clean, and efficient installation.
Zipper's Performance Products (410) 579-2828
www.zippersperformance.com Down to the Bone
The new Skull Battery Cover Band from Harley-Davidson Genuine Motor Accessories adds a sinister touch to any '06 H-D Dyna motorcycle. The easy-to-install chrome band features a three-dimensional skull motif set off with black accents. It replaces the original-equipment satin-aluminum band as a contrast to the original factory-painted battery cover or as a finishing touch.
Harley-Davidson GMA (800) 443-2153
www.harley-davidson.com Do-It-Yourself
Need to learn to build a chopper? Chuck Sheridan at Chopper Assembly Videos has produced a set of highly detailed instructional videos on bike building that will guide you step by step. All tools, parts, and assembly steps are covered in logical order in close-up video that shows you all the details you need to know, including many valuable tips and industry secrets.
Chopper Assembly Videos (614) 882-5975
www.chopperassemblyvideos.com Grip This
The new Simms knurled grips and pegs are available from Simms Custom Cycles. They're made of 100-percent billet aluminum, with chrome plating and the Simms logo etched across them for great looks and durability.
Simms Custom Cycles
(510) 537-3338
www.ronsimms.com It's a Killer
This Springer frontend is offered in any length from 2 inches under to 20 inches over, in narrow-, mid-, or wide-glide styles. It features rounded trees and corners for a super-smooth appearance. It uses Delrin isolated springs and needle-bearing rockers and is available raw or in chrome.
Cyril Huze
(561) 392-5557
www.cyrilhuze.com A Straight Slip
Want superior performance and style without breaking the bank? The new Straightshots HS slip-ons offer the great look and sound you've come to love and expect from Vance & Hines. Baffles, mounting hardware, and easy-to-understand instructions are included for a hassle-free, perfect fit every time.
Vance & Hines (562) 921-7461
www.vanceandhines.com Absolutely Elliptic
Tired of your bike looking like every other motorcycle in the lot? The "Elliptic," with its 4-inch open primary drive with outboard bearing support, stands alone in combined quality, functionality, and aesthetics.
RMD Billet (507) 348-8877
www.rmdbillet.com