Street Chopper Homepage
 
Building Custom Chopper Exhaust Pipe System Cut Angle To Match Frame
Building Custom Chopper Exhaust Pipe System
I was trying to keep the pipe flowing along the frame, so I used a piece of pipe with a bend that was close to what I needed. Then all I had to do was cut one side at an angle to match the frame. Once I had that piece lined up, I spot-welded it in place. View Related Article
Building Custom Chopper Exhaust Pipe System Heat Wrap Building Custom Chopper Exhaust Pipe System All Pieces Building Custom Chopper Exhaust Pipe System Cut Mufflers Off Ends Building Custom Chopper Exhaust Pipe System Cut Pipe Into 4 Pieces Building Custom Chopper Exhaust Pipe System Remove Burrs Building Custom Chopper Exhaust Pipe System Inserts Building Custom Chopper Exhaust Pipe System Pipe Runs Along Frame
Building Custom Chopper Exhaust Pipe System Temporary Tab Building Custom Chopper Exhaust Pipe System Join Front And Rear Pipe Building Custom Chopper Exhaust Pipe System Tack Weld Building Custom Chopper Exhaust Pipe System Front Header Pipe Building Custom Chopper Exhaust Pipe System Cut Angle To Match Frame Building Custom Chopper Exhaust Pipe System Tailpipe Building Custom Chopper Exhaust Pipe System Spot Weld Near Fender
Building Custom Chopper Exhaust Pipe System Pipe In Place Building Custom Chopper Exhaust Pipe System Pipe Off Bike Building Custom Chopper Exhaust Pipe System Weld Finished Building Custom Chopper Exhaust Pipe System Before Exhaust Wrap Building Custom Chopper Exhaust Pipe System Completed