Street Chopper Homepage
Facebook Click here to find out more!
 
Custom Handle Bars Slug Bolts Welded Inside The Risers
Handle Bars - Cutting Edge Custom Bar
Then the mounting slugs bolt were welded inside the risers. Since we run the cables through the bolts, Mark used some serious 3/4-inch bolts instead of the standard 1/2-inch. View Related Article
Custom Handle Bars Installed Custom Handle Bars All Parts Custom Handle Bars Bending Tubes Custom Handle Bars Cutting The Tubes Custom Handle Bars Fishmouth But Custom Handle Bars All Tubes Ready Custom Handle Bars Forming V Shape
Custom Handle Bars Tig Welding Custom Handle Bars Slug Bolts Welded Inside The Risers Custom Handle Bars Welds Ground Smooth Custom Handle Bars Finished Bars Custom Handle Bars Mid Cable Adjuster Custom Handle Bars Exploded View Custom Handle Bars Routing Cable
Custom Handle Bars Throttle Cable Custom Handle Bars Attaching Internal Throttle To Handlebar Custom Handle Bars Tightening The Setscrew Custom Handle Bars Cutting Off The Stock Throttle Body End Custom Handle Bars Disassembling Clutch Cable Custom Handle Bars Location For Puley Block Custom Handle Bars Tightening Cable
Custom Handle Bars Cable Locked In Place Custom Handle Bars Cable Hooked Up To Pulley Block Custom Handle Bars Cover Installed Custom Handle Bars Install Finished
Street Chopper