Inspecting A 1975 Harley-Davidson - Four-Speed Inspection
|
21. Probably the hardest seal to install while the transmission is assembled is the Fourth gear main shaft seal. However, JIMS Machine has developed this slick sleeve arrangement to install the trickily little seal with a couple taps of a mallet or hammer. We simply slid the inner sleeve on the end of the main shaft, greased the inner rubber surface of the seal, slid it over the inner sleeve, and then slid the outer sleeve over the inner and pushed the seal over the main shaft. Then we gently tapped it into the end of Fourth gear. View Related Article
|
|
|
|