Inspecting A 1975 Harley-Davidson - Four-Speed Inspection
|
28. Here's a job you might have to source out: Reaming the new kicker shaft bushings to size. An automotive machine shop equipped with a Sunnen hone should be able to help you out by honing the bushings to a slip fit. We found a set of adjustable reamers a few years ago at a swap meet, so we were able to do the job ourselves. We clamped our reamer in the vise and-using a micrometer-set the diameter to that of the new bushings. We then placed the cover over the reamer and turned in one direction (clockwise) until the reamer cut both bushings. View Related Article
|
|