Hard Shifting And Oil Leaks - Ratchet Top Tune Up - Tech STC
|
OK, that about wraps it up. We secured the shifter fork shaft in the case, coated everything with the white grease, placed the top in neutral (the same with the shifter forks), and carefully lowered the top on the case. The top should fit perfectly, no banging or beating is needed. If the top doesn't fit perfectly, pull it up and find out why. Most of the time we've found that one of the shifter forks has slid over to one side (white grease is slippery); reposition and try again. Once the top is in place, replace all the screws that you have already cleaned and tighten them down evenly. View Related Article
|
|
|
|